Go to Top

Finishes & Hardware

You Choose the Finish & Hardware

Every piece of furniture is handmade just for you.  Personalize each piece by choosing the finish from a wide array of veneer, bamboo and lacquer options.  If you prefer a particular color that’s not in our standard palette, we can match any Benjamin Moore color for a $120 fee.

Certain finishes require additional charges either because of the cost of the material itself or due to the labor involved in an extra finish process. These include bamboo ply, ebonized walnut veneer, white-washed rift white oak veneer and gloss finish.

1. Veneers Finishes

Ash-Satin-Vertical

Ash Satin

Walnut-Satin-Vertical

Walnut Satin

Cherry-Satin-Vertical

Cherry Satin

Maple-Satin-Vertical

Maple Satin

Rift-White-Oak-Satin-Vertical

White Oak Satin

Sapele-Satin-Vertical

Sapele Satin

Veneers applied to mdf or plywood. 

2. Bamboo Finishes

Amber-Boo-Vert

Amber Bamboo

Natural-Boo-Vert

Natural Bamboo

Solid bamboo plywood

(Requires an up-charge)

3. Veneers with special treatments

White-Washed-Rift-White-Oak-Satin-Vertical

White Washed Rift White Oak Satin

Ebonized-Walnut-Satin-Vertical

Ebonized Walnut Satin

Veneers that require an additional finish process.

(Requires an up-charge)

4. Lacquer Finishes

Red Currant

Red Currant

Taupestone

Taupestone

Retro Green

Retro Green

Newburg

Newburg

Vanilla Milkshake

Vanilla Milkshake

Sea Star

Sea Star

Titanium

Titanium

Glazed Green

Glazed Green

Charcoal

Charcoal

Cream Latte

Cream Latte

Celedon Green

Celedon Green

Electric Orange

Electric Orange

Blue Slate

Blue Slate

Butter Yellow

Butter Yellow

Beige

Beige

Baltic Gray

Baltic Gray

Olive

Olive

Horizon Gray

Horizon Gray

Wonk Orange

Wonk Orange

Black

Black

Ice Blue

Ice Blue

Adagio

Adagio

White Satin

White Satin

Spray finish on mdf or plywood. 

 

Hardware - Drawer Pull Options

Cylindrical-pull-on-furniture-Cropped

Cylindrical Pull

6-Inch-Aluminum-Slim-on-Furniture-Cropped

6 Inch Aluminum Slim

Cut-Out-Drawer-Pull-Cropped

Cut Out Drawer Pull

Aluminum-Tab-Pull-Cropped

Aluminum Tab Pull

 

Hardware - Leg Options

5-or-7-Inch-High-Brushed-Stainless

5 or 7 Inch High Brushed Nickel / $25/per leg

6.5-Inch-High-Morgan-Style

6.5 Inch High Morgan Style

4-Inch-High-Stepped-In

4 Inch High Stepped In

1.5 Inch High Wood

1.5 Inch High Wood

 

Description Details

1. The natural beauty and distinctive appearance of wood is derived from the inherent qualities and characteristics of wood itself. Trees of the same species, even growing side by side, are affected differently by the climate and elements required for growth. Minerals are absorbed in different ways and at different rates, even within the same tree. These factors combine to create the distinctive beauty of characteristics like:

  • Grain pattern variation (open/wide grain contrasted with close/tight grain)
  • Grain color variation (from even and consistent grain color to varied and quite dramatic)
  • Unique markings (such as dark “mineral” streaks and light-colored sap wood)

These variations can be present on each piece of furniture and within the same door/drawer front and are not considered defects.  Our samples serve as a guide to give you a general idea of what to expect. 

2. Paint ≠ Lacquer. Lacquer is a colored coating process that dries by solvent evaporation and a curing process which produces a hard, durable finish. Lacquers may vary slightly in hue due to slight variations from the lacquer manufacturer.  Our lacquering process consists of 4 coats – 2 prime coats and 2 top coats for our standard colors. 

One Response to "Finishes & Hardware"

  • Leveled Magazine
    December 18, 2013 - 6:04 pm

    Customizable furniture company Wonk NYC offer participants to select the finish, hardware and design details with all their pieces. The Lorimer 4 cabinet is also fully customizable and comes with options for the white oak with lacquered drawer fronts. You can view the Finishes page for additional wood and lacquer options.